518063
25
Zoom out
Zoom in
Previous page
1/56
Next page
23
Straight Stitching on Heavy
Fabrics
1. Lower the needle into the fabric at the
point where you wish to start sewing.
Press the small black button on the
zigzag foot with your left hand to
lock the presser foot to the fabric.
2. Lower the presser foot with your right
hand, keeping pressure on the black
button with your left hand.
3. Release the black button and start
sewing.
(1) Black button
Seam Allowance Lines
The seam guides on the needle plate and
bobbin cover plate help you measure the
seam width.
(1) Seam allowance lines
Number 15 20 1/2 5/8 3/4
Distance (cm) 1.5 2.0 1.3 1.6 1.9
Note: The numbers indicate the distance
between the middle needle position
and the seam allowance lines.
Turning a Square Corner
Stop stitching and lower the needle when
the fabric edge facing you lines up with
the cornering guides as shown.
Raise the presser foot and turn the fabric
to line up to the edge with the 1.6 cm (5/8
inch) seam guide.
Lower the presser foot and begin stitching
in the new direction.
(2) Cornering guides
(1)
(1)
(2)
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskystar 219 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskystar 219 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info