518063
15
Zoom out
Zoom in
Previous page
1/56
Next page
13
Winding the Bobbin
1. Guide the thread around the thread
guide.
2. Thread through the hole in the bob bin
from the inside to the outside. Put the
bobbin on the bobbin winder spindle.
3. Slide it to the right.
Caution: Never move the bobbin winder
spindle when the machine is running.
4. With the free end of the thread held
in your hand, depress the foot control.
Stop the machine when it has made a
few turns, and cut the thread close to
the hole in the bobbin.
5. Depress the foot control again. When
the bobbin is fully wound, it will
stop automatically. Return the bobbin
winder to its original position by
moving the spindle to the left, and cut
the thread as shown.
To use the additional spool pin, set the felt
and the spool as shown above.
(1) Additional spool pin
(2) Felt
(3) Additional spool pin hole
A
B
1
2
3
4
5
(2)
(1)
(3)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskystar 219 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskystar 219 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info