510457
36
Zoom out
Zoom in
Previous page
1/44
Next page
36
DIFFERENTIAL FEED ADJUSTMENT
The differential feed system consists of two sets of feed
teeth arranged one behind the other. Both feed teeth work
independently of each other to give perfect results when
sewing on speciality fabrics. When the amount of feed by the
front feed teeth is changed in relation to the feed by the rear
feed teeth it will “stretch” or “gather” the fabric.
Use the differential feed to prevent stretching of knit fabrics
and puckering of lightweight fabrics.
For overlock stitching on normal fabric, set the differential
feed adjusting dial to N.
Gathered Overlock (stretch, knit fabrics)
When overedging stretch fabric, such as knits and jersey,
adjust the differential feed to a value between N and 2.0. The
setting depends on the material being sewn as well as the
desired amount of gathering. Test sew with different settings
before sewing on your garment.
Stretch Overlock (lightweight fabrics)
When overedging light woven or loosely knit fabrics, such as silk and silky knitwear, adjust the differential feed to a value
between 0.6 and N. When sewing, apply gentle tension to the fabric by holding the seam lightly in front and back of the
presser foot. The setting depends on the material being sewn as well as the desired amount of stretching. Test sew with
different settings before sewing on your garment.
1
2
4
5
N
1.5
1.0
0.5
2.0
2.0
1.5
N
0.8
0.6
FABRIC DIFFERENTIAL FEED – N ADJUSTMENT RESULT
STRETCH FABRIC
(Knit, jersey)
N - 2.0
NON-STRETCH FABRIC
(Chino, denim)
N
LIGHTWEIGHT FABRIC
(Silk, silky knitwear)
0.6 - N
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna HUSKYLOCK s21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna HUSKYLOCK s21 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna HUSKYLOCK s21

Husqvarna HUSKYLOCK s21 User Manual - German - 44 pages

Husqvarna HUSKYLOCK s21 User Manual - Dutch - 44 pages

Husqvarna HUSKYLOCK s21 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info