610256
45
Zoom out
Zoom in
Previous page
1/78
Next page
—41—
4
5,6
7
8
10
11
9
Screw
Cutting width
adjust dial
4. Remove the rear needle(s) from the needle
clamp.
7. Turn the cutting width dial to 7.
Note: If it is not set to width “7”, the cutter will
not allow the Cover Stitch needle plate
(C) to be put on.
8. Put on the needle plate ( C ).
(Use the screw removed in above step 6 for
the needle plate ( C ).)
9. Insert SCHMETZ (#90) needle(s) into the
needle clamp in the position(s) advised by
the Sewing Advisor.
10. Snap on the presser foot ( C ).
11. Slide on the cutter cover ( C ).
Note: To change from Cover / Chain stitch to
standard overlock, reverse the steps
above.
12. Close the front cover.
13. Slide on the free arm cover and fl atbed
cover.
5. Set the stitch fi nger lever to “R”. (See Page 8)
and remove the presser foot ( S ).
6. Remove the standard needle plate ( S ). (Re-
move one screw.)
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 936 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 936 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 936

Husqvarna Huskylock 936 User Manual - French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info