518057
34
Zoom out
Zoom in
Previous page
1/52
Next page
–28–
2.5~3mm
—28—
Material guide
Adjusting screw
Right side of fabric
A.
B.
C.
3-4. Flatlock
There are two ways to sew a Á atlock stitch, with
wrong sides folded together to create a dec o -
ra tive look and with right sides folded together
to create ladder stitch as used for lingerie.
1. Fold the material with wrong sides together.
Then raise the presser foot, set the material
so that it is under the needle, and then lower
the presser foot. Set the stitch width control
dial to (5-7). Sew, allowing the thread to loop
off the edge (C).
Flatlock with multipurpose foot:
2. Adjust with the adjusting screw so that the
needle moves down to a position 2.5~3.0mm
(0.1~0.12 in.) inside the folded edge of the
material so that some of the stitching loops
over the edge.
3. While guiding the material with your hand,
sew at a constant speed.
Note: This foot will make it easier to sew along
the folded edge without cutting the fabric.
4. Pull the material open (Á at) as shown. This
method is not suitable for thin ma te ri als. To
adjust the position of the material guide, the
same piece of material can be used to make
a test sewing.
Note: For use of decorative threads in looper,
decrease tensions and pro gram your
settings in one of the memories for future
use.
34


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-huskylock-910

Reset search

  • Do you know if husqvarna Viking husky lock model number 910 is this model a cover stitch and A surger or just a cover stitch Submitted on 11-5-2021 at 17:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 910 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 910

Husqvarna Huskylock 910 User Manual - German - 56 pages

Husqvarna Huskylock 910 User Manual - Dutch - 56 pages

Husqvarna Huskylock 910 User Manual - French - 56 pages

Husqvarna Huskylock 910 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info