518057

Husqvarna Huskylock 910 Manual

20
Zoom out
Zoom in
Previous page
1/52
Next page
–14–
—14—
1-11. Adjusting the stitch width / cutting
width
The distance between the needle and the outer
edge of the fabric is called stitch width/cutting
width.
• The cutting width can be set between 5-7 mm
depending on the type of fabric.
• Normal stitch width/cutting width is 5.5 mm,
which corresponds to “N” on the dial.
• Turn dial
a to set the cutting width.
Note: There is an index mark on the machine.
1. Turn dial
a to set the cutting width.
2. If thread loops are formed off the edge of the
fabric, turn the dial to a higher number to cut
less fabric away.
3. If the fabric puckers within the overlock seam,
turn the dial to a lower number to cut more
fabric away.
When you experience loops off the edge of the
fabric, slide the stitch À nger toward you for À ne
tune width adjustment.
To adjust, move the stitch À nger lever toward
you from “N” position to the mark —. There are
two À ne tune settings.
After adjusting, test your stitch.
1-12. Stitch length
Normal stitch length is 2.5 mm, which
cor re sponds to “N” on the stitch length dial.
You may change the stitch length between 0.8
(rolled edge) and 5 mm.
cutting width
stitch width
Stitch À nger
Stitch À nger
lever
Stitch length
dial
a
… 20 …


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-huskylock-910

Reset search

  • Do you know if husqvarna Viking husky lock model number 910 is this model a cover stitch and A surger or just a cover stitch Submitted on 11-5-2021 at 17:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 910 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 910

Husqvarna Huskylock 910 User Manual - German - 56 pages

Husqvarna Huskylock 910 User Manual - Dutch - 56 pages

Husqvarna Huskylock 910 User Manual - French - 56 pages

Husqvarna Huskylock 910 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info