Manual Husqvarna Huskylock 910 (page 16 of 52) (English)

518057

Zoom out

Zoom in

1/52

–14–

5. Pull the thread through the needle eye

leaving about 10 cm (4”) of spare thread.

Needle threading ( C ) ( D )

1. Raise the presser foot.

2. Raise the needle to its highest position by

turning the handwheel toward you.

3. Pull thread from spool through guide

Note: Make sure the thread snaps into the slot

of guide

, and between the thread ten-

sions discs

4. Pull the thread through guides

for the

right needle and through guides

for

the left needle.

Note: Make sure that right needle thread (D)

passes to the right of thread guide

and

left needle thread (C) to the left.

—10—

Preparations and control

Check that thread has not slipped off the guides

nor has broken. Make sure the upper cutter

moves correctly against the lower cutter by

slowly turning the handwheel toward you.

Check that there are no pieces of fabric or

thread between the cutters. Turn the handwheel

toward you and make sure the threads form the

stitch on the stitch À nger of the stitch plate. If

not, check threading.

When the machine has been threaded, close

the front cover and lower the presser foot.

CD AB

10cm

Do you know if husqvarna Viking husky lock model number 910 is this model a cover stitch and A surger or just a cover stitch Submitted on 11-5-2021 at 17:28
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 910 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 910

Husqvarna Huskylock 910 User Manual - German - 56 pages

Husqvarna Huskylock 910 User Manual - Dutch - 56 pages

Husqvarna Huskylock 910 User Manual - French - 56 pages

Husqvarna Huskylock 910 User Manual - Spanish - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Huskylock 910 Manual

Product: