518056
40
Zoom out
Zoom in
Previous page
1/52
Next page
–34–
1~2mm
—34—
3-9. Cleaning after sewing
• First unplug the machine.
1. Open the front cover and free arm cover (See
page 3).
2. Remove all the lint with the brush from the
ac ces so ry box.
3-10. Storage
1. When the machine is not in use, disconnect it
from the power supply.
2. Cover the machine with the vinyl cover when
you have À nished sewing.
3. Store the machine so that it is not directly
exposed to sunlight or humidity.
3-11. Replacing the lower cutter
Cutters are available as an accessory at your
authorized Husqvarna dealer.
• Unplug the machine
1. Open the front cover (See page 3).
2. Disengage upper cutter and turn to lowest
position.
3. Loosen the screw of the lower cutter and
remove the cutter.
4. Mount the new cutter.
5. Re-position the upper cutter.
6. Turn the handwheel so that the needles are
in their lowest position.
7. Make sure that the front edge of the cutter is
1~2 mm lower than the cutting edge of the
lower cutter.
8. Tighten the new cutter with the screw.
9. Always clean with the brush.
3-12. Lubrication
To make the machine run smoothly and quietly
some of the moving parts must be lubricated
once or twice a month when using the machine
normally and once a week when using it
fre quent ly. Always remember to unplug the
ma chine for service. Remove all excessive oil
before you start sewing.
Lower cutter
Lowest position
Upper cutter
Set screw
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 905 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 905 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 905

Husqvarna Huskylock 905 User Manual - German - 56 pages

Husqvarna Huskylock 905 User Manual - Dutch - 56 pages

Husqvarna Huskylock 905 User Manual - French - 56 pages

Husqvarna Huskylock 905 User Manual - Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info