610255
28
Zoom out
Zoom in
Previous page
1/40
Next page
–23–
(1) (2)
1~1.5
A
0.5~1
3-6. Corded Overlock
Corded overlock can be used to strengthen
stitches when joining elastic fabrics such as knits.
There are two ways to sew corded overlock.
(1) Thread cord through the hole on the front of the
foot.
(2) Place a slightly wide cord or tape (about
3mm) under the right needle and start to sew
catching cord or tape in stitching.
(3) To sew a narrow cord, positioning it on the
edge of the fabric encased in the overlock
stitch.
Taping a seam can prevent knit fabrics from
stretching and also stabilize the seams.
4. MAINTENANCE
4-1. Replacing the Cutter
The upper cutter and lower cutter are made of a
specially long-lasting steel and will seldom have
to be replaced. However, when they do not cut
the fabric, even though they are set in the right
position, replace them as follow:
Unplug the machine.
Open the front cover.
(1) Replacing the lower cutter:
a. Turn the moveable cutter to the non-operating
position (see figure E., p. 6).
b. Loosen the lower cutter clamp screw and
remove the lower cutter.
c. Place a new lower cutter in the groove of the
cutter holder, align the cutting edge level with
the top surface of the needle plate and tighten
the clamp screw.
d. Return the moveable cutter to its original
position.
(2) Replacing the upper cutter:
a. Set the upper cutter to its lowest position by
turning the handwheel toward you.
b. Loosen the upper cutter screw.
c. Place a new moveable cutter in the groove of
the moveable cutter holder.
d. Make sure that the cutting position of the upper
cutter is positioned downward 0.5 to 1.0mm
from the top of the cutting position of the lower
cutter.
Lower cutter clamp screw
Align
Needle plate
Lower cutter
Lowest position
Upper cutter
Needle plate
Lower cutter
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 901 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 901

Husqvarna Huskylock 901 User Manual - German - 40 pages

Husqvarna Huskylock 901 User Manual - Dutch - 40 pages

Husqvarna Huskylock 901 User Manual - French - 40 pages

Husqvarna Huskylock 901 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info