610255
15
Zoom out
Zoom in
Previous page
1/40
Next page
–10–
Draw the finished fabric gently backward and to
the left as the machine is operating and make
chain stitches. This is called chain stitch sewing.
Then cut the threads 2 ~ 5cm (1-2”) from the
presser foot.
Do not pull it out roughly as the needle may
bend and break.
For a neater finish, pull thread ends back through
the seam using hook or yarn needle.
(2) End of sewing
Make chain stitches at the end of the sewing to
prevent the threads from coming undone and to
prepare for the next sewing (this is called chaining
off).
Presser Foot Pressure Adjustment
The presser foot pressure is pre-adjusted for
fabrics of medium (standard) thickness.
Adjustment is necessary only when you work on
very thin or very thick fabrics.
Accordingly, sew thinner fabrics with less pressure
and thicker fabrics with more pressure. Increase
or decrease the pressure of the presser foot by
turning the adjustment screw in the direction as
shown.
Tighten Loosen
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 901 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 901

Husqvarna Huskylock 901 User Manual - German - 40 pages

Husqvarna Huskylock 901 User Manual - Dutch - 40 pages

Husqvarna Huskylock 901 User Manual - French - 40 pages

Husqvarna Huskylock 901 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info