610255
10
Zoom out
Zoom in
Previous page
1/40
Next page
–5–
(C)
(D)
(A)
(B)
1-6. Changing Needles
Replace the needles in the following order:
Note: Unplug the machine before replacing the
needles.
(1) Bring needles to its highest position by turning
the handwheel toward you.
(2) Loosen the needle clamp screw and remove
two needles together.
(3) With the flat side away from you, insert two
new needles all the way up into the groove of
the needle bar.
Use standard home sewing machine needles size
#11(#75) or #14(#90).
Changing Presser Foot
Turn the machine off.
1. Raise the presser foot.
2. Raise the needles to its highest position by
turning the handwheel toward you.
3. Push the red button A and the foot will come off.
4. Place the new foot with the pin right underneath
the groove of the ankle and lower the presser
foot. The foot will snap back into place.
2. THREADING
2-1. Threading
When threading the machine from the beginning,
threading must be carried out in the following
sequence:
First: Lower looper threading (A)
Second: Upper looper threading (B)
Finally: Needle threading (C, D)
(1) Upper looper threading (A)
• Bring the upper looper to its lowest position by
turning the handwheel toward you.
• Draw thread from spool and pass it through
guide
c of the thread stand and then, in order,
through guides d ~ j (Fig. A).
Thread the eye of upper looper k using
tweezers. Cut the thread leaving about 10cm
(4”) of thread tail (Fig. D).
• Close the front cover.
Needle clamp screw
Removing
Attaching
Fig. A
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 901 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 901 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Huskylock 901

Husqvarna Huskylock 901 User Manual - German - 40 pages

Husqvarna Huskylock 901 User Manual - Dutch - 40 pages

Husqvarna Huskylock 901 User Manual - French - 40 pages

Husqvarna Huskylock 901 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info