518052

Husqvarna H Class 600E Manual

61
Zoom out
Zoom in
Previous page
1/64
Next page
~ 59 ~7. Care of Your Machine
Machine Side
Embroidering Continues when Thread is Tangled
If the thread remains tangled, the fabric may pucker and
ruin the À nished embroidery. Stop embroidering, remove
the hoop and untangle the thread.
Top Thread Tension is Too Tight
This can cause the fabric to pucker and result in uneven
feeding, so reduce the thread tension (see page 45).
Needle Tip is Broken or Needle is Too Thick.
Select a correct needle (see page 16-17).
Thread is tangled somewhere along the thread path.
If the thread is tangled on the spool pin or somewhere
along the thread path, it will increase the thread tension and
cause the fabric to pucker, so check the thread (see page 11-
15).
Top thread does not stay in the needle eye
If embroidering several color blocks in the same color the
machine might cut the top thread too short. If that happens,
deactivate Thread Cutting Mode (see page 20) to make sure
the top thread stays in the needle eye.
Hoop Side
No Stabilizer Attached when using Light or Stretch Fabric
Always use stabilizer together with the fabric in the hoop.
Fabric has not been correctly Hooped
When hooping stabilizer and fabric make sure that they are
smooth and securely hooped. (see page 42).
Embroidery Hoop is not Correctly Attached.
Slide the hoop connector into the hoop attachment on the
embroidery arm until it clicks into place. (see page 42).
Hoop is Obstructed Against Free Motion.
Check around the hoop and remove things which cause
obstruction.
TROUBLE SHOOTING - EMBROIDERY
If your embroidery becomes distorted in any way, please check the possible causes and solutions below.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info