518052
38
Zoom out
Zoom in
Previous page
1/64
Next page
~ 36 ~
Sewing
machine
display
Problem and solution Sewing
machine
display
Problem and solution
Machine is locked up due to thread
entangled with bobbin case or rotation
interrupted forcibly.
Turn off power switch and eliminate the problem
that caused the machine to stop.
Breakage of top thread is detected.
Supply top thread and restart.
Bobbin winder is locked up due to thread
entangled around spindle or rotation
interrupted forcibly.
Turn off power switch and eliminate the problem
that caused the bobbin winder to stop.
Breakage of bobbin thread is detected.
Supply bobbin thread and restart.
Buttonhole is selected on selection button,
but buttonhole lever is raised.
Lower buttonhole lever and begin sewing
buttonhole.
Unable to start with presser foot lifted.
Lower presser foot and restart.
Buttonhole lever is not raised.
Raise buttonhole lever when sewing stitch patterns.
Failure in thread trimming
Turn off power supply, raise needle and turn on
power supply.
Foot control is connected while operating
with Start/Stop button or Start/Stop
button is pushed while foot control is
connected.
Disconnect foot control or restart sewing by
depressing foot control.
or
Foreign particle like tip of needle, screw
driver etc. is detected on machine socket
for foot control.
Remove foreign particle.
1-17
(Error
message
number)
System error occurs.
Turn off and on power switch to eliminate the
problem that caused the system error to occur. If
the error number should not disappear, consult an
authorized technician.
ERROR MESSAGES WHEN SEWING
When your machine encounters problems when sewing, an error message consisting of a number and an illustration will
appear on the display. Use the table below to identify and solve the problems.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info