518052
15
Zoom out
Zoom in
Previous page
1/64
Next page
~ 13 ~2. Set Up Your Machine
Note: For smooth threading, it is recommended that the machine is
set for straight stitch (in center needle position) when using the needle
threader.
Note: The needle threader is designed to be used for size 70-120
needles. You cannot use the needle threader for needles size 60 or
smaller, the wing needle, twin needle or when the Buttonhole foot is
attached. There are also some optional accessories that require manual
threading of the needle.
When threading the needle manually, make sure that the needle is
threaded from front to back.
Helpful Hints:
Put a drop of sewing machine oil onto the felt disc (see picture), if the
machine is used after a long interval.
If the threading hook is deviated from needle hole, adjust the position
of the hook using a small screw driver.
THREADING FOR TWIN NEEDLE
A twin needle sews two rows of parallel stitches for pin
tucks, double top stitching and decorative sewing.
When using twin needles, the stitch width should never be
set above the twin needle limitation (see page 20), regardless
of the stitch you have selected. Doing so will result in
broken needles and possible damage to your machine.
The twin needle is an optional purchase.
Threading the Twin Needle
1. Place a spool on each spool pin. Thread the two threads
as one. Draw one thread through each needle from front
to back.
2. Pull up the bobbin thread as for single needle sewing.
Pull the three threads together under the presser foot
toward the left, leaving a thread end about 6ȩ (15 cm)
long.
Note: Needle threader cannot be used to thread the twin needle.
Helpful Hints:
1. Always activate the Twin Needle Safety (see page 20) prior to
selecting a stitch. This will preclude any possibility of the twin
needle breaking.
2. Turning off the machine returns the machine to normal sewing
mode. Twin Needle Safety is only active when the Twin Needle
Safety button is lit red.
Felt disc
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info