518052
5
Zoom out
Zoom in
Previous page
1/64
Next page
~ 3 ~
1
6
11
2
7
12
3
8
13
4
9
5
10
1. Get to Know Your Machine
ACCESSORIES
1. INSPIRA™ needles
2. Bobbins (4 total - one placed in bobbin
case upon delivery)
3. Spool cap (small)
4. Spool cap (medium)
5. Spool cap (large)
6. Screwdriver for stitch plate
7. Screwdriver (large)
8. Screwdriver (small)
9. Felt pad
10. Vertical spool pin
11. Seam ripper/Brush
12. Thread spool net (long)
13. Thread spool net (short)
Stitch chart (not pictured)
PRESSER FEET
Utility Foot A
Attached on the machine upon delivery (see previous page). This foot is used mainly for straight stitching and zigzag
stitching with a stitch length longer than 1.0.
Decorative Stitch Foot B
When sewing decorative stitches or short zigzag stitches and other utility stitches with less than
1.0 mm stitch length, use this foot. The tunnel on the underside of the foot is designed to feed
smoothly over the stitches.
Buttonhole Foot C
This foot is used for sewing buttonholes that measure larger than 1ȩ (2.5cm) in diameter. Use the
guide lines on the toe of the foot to position the garment edge. The two tunnels on the bottom of
the foot ensures a smooth feed over the buttonhole columns. The À nger on the back of the foot
holds cording for corded buttonhole.
Blind Hem Foot D
This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The right toe
of the foot is designed to ride along the hem edge.
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle, making it easy to sew
close to both sides of the zipper teeth. Move needle position to right or left to sew closer to zipper
teeth or for covering large cording.
Edging Foot J
This foot is used for overcasting and seam/overcasting. Stitches form over the pin which prevents
puckering at the edge of the fabric.
Buttonhole foot and underplate
See instructions on page 30 on how to use the buttonhole foot.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H Class 600E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H Class 600E in the language / languages: English as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H Class 600E

Husqvarna H Class 600E User Manual - German - 64 pages

Husqvarna H Class 600E User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info