Manual Husqvarna H-Class 200S (page 30 of 64) (English, French, Spanish)

517448

Zoom out

Zoom in

1/64

FIG. 3

FIG. 1

FIG. 2

TESTING STITCH OVERLOCK STITCHES

After threading is completed, use a scrap of fabric that you plan to sew and test sew in the

following order:

1. Gently pulling all the threads to the left, lower the presser foot. Rotate the hand wheel

toward you a few times to see if the lock stitches are properly formed.

2. Start the machine at low speed and feed in test fabric under the presser foot by slightly

pushing it forward. (This can be done with the presser foot down on most fabrics except

bulky materials.) Guide the fabric gently as machine automatically feeds the material.

3. Check thread tensions by test sewing on a scrap of fabric.

4. At the fabric end, continue running the machine at a low speed, gently pulling the fabric

towards the back until about 2" (5 to 6 cm) of extra stitches are produced off the fabric.

Cut thread by pushing thread cutter lever down, or use scissors.

HClass_200s_EN.indd 28 2010-11-19 09:20:43

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-Class 200S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna H-Class 200S Manual

Product: