517448
22
Zoom out
Zoom in
Previous page
1/64
Next page
20
THREADING YOUR MACHINE
Incorrect threading may cause skipped stitches, breaking threads, or other problems.
Thread correctly before test sewing.
Threading must be carried out in the sequence of Lower Looper - Upper Looper - Needle.
Open the front cover and the working table. Raise needle to its highest point by turning
hand wheel towards you, and raise the presser foot.
Before re-threading lower looper, remove thread from needle eye rst, then re-thread the
lower looper. This will prevent tangling.
NOTE: Thread tension is released when the presser foot is up.
THREADING LOWER LOOPER
1. Feed the thread through the thread guide as illustrated.
2. Pull the thread through tension slot. Holding the thread with your left hand, pull down
with right hand rmly.
3. Draw the thread through thread guides as illustrated.
4. Pass the thread through the lower looper eye and hook it around part A as indicated
by the arrow. Pull about 4” (10 cm) of extra thread above the needle plate and behind
the presser foot.
2. STARTING TO SEW
HClass_200s_EN.indd 20 2010-11-19 09:20:41
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H-Class 200S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-Class 200S in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info