510454
37
Zoom out
Zoom in
Previous page
1/44
Next page
4. BASIC SEWING TECHNIQUES
35
Free-Motion - Machine Set Up
When sewing free-motion, it is necessary to use
an Open Toe Free-Motion Spring Foot. This foot
is not included with this machine, but is available
for purchase at your Authorized HUSQVARNA
VIKING® Dealer.
1. Lower the feed teeth as explained in chapter
2.
2. Remove the presser foot ankle with the
screwdriver.
3. Place the Open Toe Free Motion Spring Foot
from behind. The wire guide of the presser
foot (A) should rest on top of the needle
clamp screw (B). Insert the screw
and tighten the screw with a screwdriver (C).
Free-Motion Stippling
Free-motion stippling not only keeps the top,
batting and backing together, but it also adds
texture and interest to your quilt.
Free-motion stippling is done with the feed
teeth lowered. You move the fabric manually to
determine the stitch length.
1. Set the machine for stippling by selecting
Straight Stitch (01).
2. Attach the optional Open Toe Free-Motion
Spring Foot.
3. Lower the feed teeth.
4. Using safety pins, pin baste the quilt layers
together.
Note: Practice stippling on scraps of fabric and batting.
Sewing with a constant speed will help to keep the stitches
even.
5. Begin near the center of your quilt. Take one
stitch and pull the bobbin thread to the top
of the quilt. Sew a few stitches in place to
lock the threads.
6. Move the quilt in a meandering motion.
Guide the quilt so that the stitching does not
cross over itself and travel in a meandering
motion.
A
B
C
3
2
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H-CLASS 100Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-CLASS 100Q in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H-CLASS 100Q

Husqvarna H-CLASS 100Q User Manual - German - 44 pages

Husqvarna H-CLASS 100Q User Manual - Dutch - 44 pages

Husqvarna H-CLASS 100Q User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info