518050
46
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book Freesia 415, 425
46
Trouble Shooting
Checking the needle
Always start with a new needle as
soon as you discover that a stitch is
not what you expected. Test sew on
a scrap of the fabric you are sewing.
Check that you have chosen the
correct needle and see that it is
correctly inserted. See page 15.
Unattractive stitches
The thread tension is not correct.
See page13. Make sure that the
thread is not catching. Certain thread
spools are unsuitable for spooling
from the horizontal spool pin. Try
instead with the vertical spool pin.
The machine may be incorrectly
threaded. Be sure to place spool
holders correctly. For correct
threading, see page 9.
Wrong bobbin thread. It should be
of the same thickness as the upper
thread.
The needle breaks
The needle can strike against stitch
plate and break. Change the needle.
See page 15. Do not pull fabric as
you sew, let the machine feed.
The upper thread breaks
Check the thread spool to see that it
has not caught in any way. The
needle eye may have sharp edges
which cut the thread. If so, change
the needle. See page 15.
The upper thread is incorrectly
threaded. See page 9. The upper
thread may have too much tension.
Refer to page 13.
The hole in the stitch plate may be
chipped and have sharp edges. We
recommend that you replace it.
The bobbin thread breaks
The bobbin thread may be incorrect-
ly threaded. See page 12.
The stitch plate hole is damaged.
See "Upper thread breaks".
Irregular thread tension
This may be due to poor quality
thread. When sewing with cotton
thread, increase the thread tension.
The bobbin thread breaks
The bobbin thread may be
incorrectly threaded. See page 12.
The stitch plate hole is damaged.
See "Upper thread breaks".
Irregular thread tension
This may be due to poor quality
thread. When sewing with cotton
thread, increase the thread tension.
The machine does not feed the
fabric
The stitch length is too short.
Increase stitch length.
The feed teeth may be lowered.
Raise them by turning the dial to
. See page 15.
The feed teeth are full of dust and
dirt. Clean with the brush. See page
45.
The stitch is too loose - fabric
layers not held together
The thread tension is far too loose.
Page 13 shows how to adjust the
thread tension.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Fresia 425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Fresia 425 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info