518049
11
Zoom out
Zoom in
Previous page
1/52
Next page
Instruction book Freesia 415, 425
11
1. Place an empty bobbin with the mark outwards on the bobbin spindle on the
front of the machine.
2. Place the large spool holder under the thread on the spool pin.
3. Bring the thread under the thread guide (a) and over thread guide (b), then
around thread guide (c) as illustrated.
4. From above wind a few turns of thread around the bobbin and into the
cutter.
5. Bring the bobbin spindle down. Press the foot control. When the bobbin
winding is finished, the bobbin will stop automatically. Remove the
bobbin, cut off the thread and bring the bobbin spindle up.
Bobbin winding with the machine threaded
Make sure that the presser foot is up and the needle is in the highest posi-
tion.
Note! Do not use a plastic presser foot when bobbin winding.
1. Place your empty bobbin with the small mark outwards on the bobbin spindle
on the front of the machine.
2. Pull the thread from the needle under the presser foot and to the right over the
thread guide (c).
3. Start from above and wind a few turns of thread around the bobbin. Cut off the
thread on the thread cutter (d).
4. Bring the bobbin spindle down. Press the foot control. When the bobbin
winding is finished, the bobbin will stop automatically. Remove the bobbin,
cut off the thread and bring the bobbin spindle up.
Note! We do not recommend winding clear nylon or other stretchy threads
through the needle. Instead see "Bobbin winding - vertical spool pin".
Bobbin winding - vertical spool pin
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Fresia 415 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Fresia 415 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info