518048
22
Zoom out
Zoom in
Previous page
1/48
Next page
20
Threading for Twin Needle
Turn off the main switch
1. Insert a twin needle.
2.
LEFT NEEDLE: Thread the machine as
explained on page 18 and thread the left
needle.
3. Pull up the vertical spool pin and place a
spool cap on the spool pin. Place a thread
spool or wind a bobbin with the thread
you are going to use as the second upper
thread.
4.
RIGHT NEEDLE: Thread the machine as
before but this thread should lie outside
the upper needle thread guide (A) and
behind the lower needle thread guide (B).
Thread the right needle manually.
Note: The maximum twin needle width to be used on
this machine is 2.5mm.
Note: Only use symmetrical twin needles (C). Do not
use this type of twin needle (D), since it may damage
your sewing machine.
CUTTING THE THREAD
Once you have nished sewing you can cut
the thread by raising the presser foot and draw
the threads to the left side of the machine and
cut them using the thread cutter.
A
B
DC
A
B
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Emerald 203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Emerald 203 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Emerald 203

Husqvarna Emerald 203 User Manual - German - 48 pages

Husqvarna Emerald 203 User Manual - Dutch - 48 pages

Husqvarna Emerald 203 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info