518047
20
Zoom out
Zoom in
Previous page
1/48
Next page
18
THREADING THE
UPPER THREAD
Make sure the presser foot is raised and the
needle is in the up position.
Turn off the main switch.
1. Pull the spool pin up. Place a spool cap and
then the thread on the spool pin. Place the
second spool cap on the spool pin (A). Push
the spool pin back in.
2. Bring the thread in the direction of the
arrow under the thread guide (B) so that
the thread snaps into place. Then bring the
thread under the second thread guide (C).
3. Bring the thread down between the thread
tension discs (D).
4. Continue threading by drawing the thread up
into the slot on the take-up lever (E) from
the right to the left.
5. There are two thread guides close to the
needle: (F) and (G). Insert the thread into the
two thread guides.
6. The needle is threaded from front to back.
The white on the presser foot ankle makes it
easy to see the eye of the needle. See needle
threader instructions on the next page.
7. Place thread under the presser foot and into
the thread cutter where it is cut.
E
G
F
B
A
C
E
D
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Emerald 183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Emerald 183 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Emerald 183

Husqvarna Emerald 183 User Manual - German - 48 pages

Husqvarna Emerald 183 User Manual - Dutch - 48 pages

Husqvarna Emerald 183 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info