518047
17
Zoom out
Zoom in
Previous page
1/48
Next page
2. SET UP
15
LOWER THE FEED TEETH
To lower the feed teeth you need to remove
the accessory box. The feed teeth lever is
located on the back of the machine at the
base of the free-arm.
Slide the lever (A) to the right to lower the
feed teeth. The feed teeth are raised when you
move the lever (A)to the left. The feed teeth
will come up when you begin to sew or turn
the handwheel towards you. The feed teeth
should be lowered when sewing on buttons.
CHANGING THE PRESSER FOOT
Turn off the main switch
1. Make sure the needle is in the highest
position. Pull the presser foot towards
you.
2. Line up the cross pin on the foot with the
gap in the presser foot ankle. Press back
until the foot snaps into place.
CHANGING THE NEEDLE
Turn off the main switch
1. Use the hole in the multipurpose tool to
hold the needle.
2. Loosen the needle screw (B).
3. Remove the needle.
4. Insert the new needle using the
multipurpose tool. Push the new needle
upwards with the at side away from you
until it will go no further.
5. Tighten the needle screw (B).
A
1
2
B
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Emerald 183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Emerald 183 in the language / languages: English as an attachment in your email.

The manual is 8,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Emerald 183

Husqvarna Emerald 183 User Manual - German - 48 pages

Husqvarna Emerald 183 User Manual - Dutch - 48 pages

Husqvarna Emerald 183 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info