517446
14
Zoom out
Zoom in
Previous page
1/48
Next page
12
Bobbin Winding
1 Pull the handwheel out to put the
machine in bobbin wind position (the
needle will not go up and down).
2 Guide the thread around the bobbin
thread tension guide into the tension
disk.
3 Thread through the hole in the
bobbin from the inside to the outside.
Put the bobbin on the bobbin winder
spindle with the free end of the
thread coming out at the top.
4 Slide the bobbin winder spindle to the
right.
NOTE: Do not move the bobbin
winder spindle while the machine is
running.
5 With the free end of the thread held
in your hand, press the foot control.
Stop the machine when the bobbin
has made a few turns, and cut the
thread as illustrated.
6 Press the foot control again. When
the bobbin is fully wound, it will stop
automatically. Slide the bobbin winder
to its original position by moving the
spindle to the left, and cut the thread
as illustrated.
7 Push in the handwheel.
To use the vertical spool pin, set the felt
and the spool as shown above.
a Vertical spool pin
b Spool pin felt
c Spool pin hole
a
b
c
3
1
3
1
4
2
5
6
7
2
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna EMERALD 118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna EMERALD 118 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna EMERALD 118

Husqvarna EMERALD 118 User Manual - German - 48 pages

Husqvarna EMERALD 118 User Manual - Dutch - 48 pages

Husqvarna EMERALD 118 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info