510443

Husqvarna Eden-Rose250M Manual

45
Zoom out
Zoom in
Previous page
1/48
Next page
CONDITION /CAUSE REFERENCE
The Needle Thread Breaks
• The needle thread is not threaded properly.
• The needle thread tension is too tight.
• The needle is bent.
• The needle is incorrectly inserted.
• The needle thread and the bobbin thread are not placed
under the presser foot at start of sewing.
• The threads were not drawn to the rear after sewing.
Page 16
Page 21
Page 12
Page 12
Page 22
Page 23
The Bobbin Thread Breaks
• The bobbin thread is not threaded properly in the bobbin
case.
• Lint has collected in the bobbin case.
• The bobbin is damaged and does not turn smoothly.
Page 15
Page 41
Change the bobbin
The Needle Breaks
• The needle is incorrectly inserted.
• The needle clamp screw is loose.
• The threads were not drawn to the rear after sewing.
• The needle is incorrectly inserted, bent or blunt.
• The needle and/or threads are not suitable for the fabric
being sewn.
Page 12
Page 12
Page 23
Page 12
Page 12
Skipped Stitches
• The needle thread is not threaded properly.
• A poor quality needle is used.
• The needle thread tension is too tight.
Page 16
Change the needle
Page 21
Seam Puckering
• The needle thread is not threaded properly.
• The stitch length is too long for the fabric.
Page 16
Make stitch shorter.
43
Troubleshooting
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Eden-Rose250M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Eden-Rose250M in the language / languages: English as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info