510443
28
Zoom out
Zoom in
Previous page
1/48
Next page
1
3
2
4
5
1
3
2
4
5
26 – Utility Sewing
REINFORCED STRAIGHT STITCH
Machine setting
1. Stitch pattern: 1
2. Stitch width: 0 or 5
3. Stitch length: stretch
4. Thread tension: 2 – 5
5. Presser foot: Utility foot A
This stitch is stronger than regular
straight stitch, due to the fact that it is a
triple and elastic stitch.
The reinforced straight stitch can be
used for heavy stretch fabrics, for crotch
seams which are subject to considerable
strain and for topstitching in heavy
fabrics.
BUTTON SEWING
Machine setting:
1. Stitch: 2
2. Stitch width: Adjust as necessary
3. Stitch length: Any
4. Thread tension: 3 – 7
5. Feed teeth: Lowered
Mark the fabric where the button is to
be located. Lower the feed teeth. Place
the material under the presser foot ankle.
Place the button on marking and lower
the presser bar so that the presser foot
ankle is between the holes of the button.
Hold the thread ends to one side. Turn
the handwheel and check to be sure that
the needle goes into the holes of the
button. Sew 5-6 stitches. Set the stitch
width dial to 0 and lock the threads with
a few stitches.
Note: Do not use this technique if the button is
less than 1 cm (3/8”) in diameter.
Raise the feed teeth after button sewing.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Eden-Rose250M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Eden-Rose250M in the language / languages: English as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info