Manual Husqvarna Eden-Rose250M (page 4 of 48) (English)

510443

Zoom out

Zoom in

1/48

CLEAR PIPING FOOT (4130971-45)

Insert packaged piping into seams and edges for a tailored nish. Cover cord

with fabric for specialty piping. The clear view allows you to see the piping

placement and see exactly where you are stitching. The clear view enables you to

see the rst row of stitching and adjust your needle position to stitch next to the

original row. Straight Stitch, length 2.5.

To Make Piping From Your Fabric:

1. Snap on the Clear Piping Foot.

2. Cut bias or crosswise grain strips

wide enough to cover the cording

plus seam allowances.

3. Lay the cording on the wrong side

of the fabric strip and wrap the

fabric over the cord.

4. Place the fabric and cord under the

Clear Piping Foot with the cord in

the groove on the underside of the

foot.

5. Sew. The groove will guide the cord so the fabric covers it evenly.

Hint: When you sew this piping into a garment, adjust the needle position so it stitches one

setting closer to the cord, to cover the rst stitching.

To Stitch Piping into a Seam

1. Snap on the Clear Piping Foot.

2. Place the piping along the seam line on the right side of the fabric and stitch

in place with piping in the groove

of the foot.

3. Place the second piece of fabric on top with the right sides together.

4. Put fabric and piping layers under the piping foot with the piping in the

groove on the underside of the foot. Sew. The groove on the underside of

the foot will guide the piping as you sew.

Hint: Notch the seam allowance of the piping on curves and corners.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Eden-Rose250M in the language / languages: English as an attachment in your email.

The manual is 5,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna Eden-Rose250M Manual

Product: