609911
19
Zoom out
Zoom in
Previous page
1/36
Next page
19
REVERSE SEWING
CHANGING SEWING DIRECTIONS
Reverse sewing is used for locking the end of seams and
where reinforcement is needed. At the end of seam, press
down the reverse sewing lever and touch the foot control
lightly. Sew a few reverse stitches. Release the lever and the
machine will sew forward again (A).
1. Stop the machine at the point where you wish to change
directions with the needle in the fabric.
2. Raise the presser foot and turn the fabric using the
needle as a turning point.
3. Lower the presser foot and start sewing in the new
direction.
REMOVING THE FABRIC
Turn the handwheel towards you to bring the thread take up
lever to its highest position. Raise the presser foot and draw
the fabric away from you.
CUTTING THE THREAD
Hold the threads behind the presser foot. Using both hands,
guide them to the slit at the rear of the presser bar and press
down to cut the thread. You can also use the thread cutter on
the side of the machine (B).
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna E20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna E20 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna E20

Husqvarna E20 User Manual - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info