609685
86
Zoom out
Zoom in
Previous page
1/104
Next page
8:8
FUNCTION BUTTONS IN EMBROIDERY STITCH-OUT
1. Start/Stop
Press this button to start or stop the machine embroidering
without using the foot control. Press START/STOP to begin
and press again to stop.
Your machine stops automatically at color changes and when
the embroidery is nished.
2. STOP (Monochrome)
When embroidering STOP is automatically activated and the
machine stops at color changes. Deselect STOP to eliminate
stops for color changes to create monochrome embroidery
(see page 8:4). The LED next to the button is lit when STOP
is activated.
Note: If the Automatic Jump Stitch Trim function is selected in the
SET Menu it will still be active between the color blocks.
3. FIX (Baste)
Press FIX to baste an outline of the embroidery design area to
baste the fabric to the stabilizer.
4. Selective Thread Cutter
The Selective Thread Cutter automatically cuts the top and
bobbin threads and raises the presser foot. At the end of a
color block only the top thread is cut. When the design is
nished, both top and bobbin threads are cut automatically.
Note: Selective Thread Cutter Auto can be cancelled in the SET Menu,
see page 3:10.
5. Needle Stop Up/Down (Trim Position)
The machine will move the hoop forward, towards you, for
easy thread trimming.
6. Speed + and -
Each stitch type in a design and each hoop size has a pre-set
maximum speed at which it can be sewn. Touch Speed - or
Speed + to decrease or increase embroidery speed. When
not embroidering, touch Speed and a pop-up message on the
screen will indicate the speed setting. You can set the speed
by touching the slider in the pop-up message. If you change
the speed setting while embroidering no pop-up message will
appear.
When sewing with metallic threads, or when sewing on
delicate fabrics, lower the speed for optimal results.
7. Sensor Foot Up and Extra Lift
Press Sensor Foot Up and Extra Lift to lift the presser foot to
Up position. Press once more and the presser foot will raise to
Extra Lift, to make it easier to insert or remove the hoop.
8. Sensor Foot Down and Pivot
The presser foot is lowered automatically when you start
embroidering.
Press the Sensor Foot Down button to lower the presser foot
into the Embroidery “oat” position.
9. Reverse
Reverse has no function in Embroidery Mode.
2
1
3 5 64
7
8
9
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info