609685
58
Zoom out
Zoom in
Previous page
1/104
Next page
4:16
1. 2. 3. 4.
MANUAL BARTACK
Decide the length of your bartack manually with stitch A:21.
sew:
Place fabric under the presser foot. Touch Sensor Foot Down
and Pivot twice and adjust the fabric if necessary. Step on the
foot control, the Sensor Foot lowers automatically and stitch.
1. Your machine will sew a straight stitch until you touch
Reverse .
2. Your machine will then sew in reverse until you touch
reverse again.
3. Your machine will then sew a Zig Zag, covering the
straight stitches.
4. Touch reverse to automatically tie off and cut the threads.
SEWING ON BUTTONS
Sew buttons, snaps, hooks and eyes quickly with your sewing
machine.
Select the fabric you are using and the stitch for sewing on
buttons A:32.
1. Snap off the presser foot and lower the feed teeth.
2. Place the fabric, multipurpose tool and button under the
ankle with the holes in the button lined up with the swing
of the needle. Check the swing of the needle by pressing
the mirror side to side button to be sure the needle will
not hit the button. Bring the needle down into the holes
of the button with the handwheel to verify.
Tip: When using the multipurpose tool, the button is stitched to the fabric
leaving a shank. Place the thin end of the multipurpose tool under the
button when sewing on light fabrics. Use the thick end for heavier fabrics.
Hold in place on the fabric with transparent tape.
If stitching without the multipurpose tool the button is stitched to the
fabric without distance.
Note: The recommended width of 3.0 is set for most buttons. If you sew
a tiny button or a very large coat button, decrease or increase the stitch
width until the swing of the needle sews in the holes of the button.
3. Set the number of stitches to sew on the button by
pressing the up and down arrows. Six to eight stitches is
standard.
4. Press the foot control. The sewing machine will sew the
number of stitches set on the screen and then tie off and
stop.
5. Raise feed teeth when button sewing is completed.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info