609685
45
Zoom out
Zoom in
Previous page
1/104
Next page
Sewing 4:3
Free Motion
Technique
Exclusive
SEWING
ADVISOR
setting
SEWING INFORMATION TAB
Your machine will choose the best stitch settings for the
selected fabric. The Sewing Information tab consists of three
parts.
At the top of the tab you will see the Exclusive SEWING
ADVISOR
choices that you have made; what fabric you have
chosen and what technique you wish to use.
Below the Exclusive SEWING ADVISOR
setting you
will see what needle to use, if stabilizer and/or glide sole is
needed.
In the lower part of your tab you will nd the stitch
adjustments. Here you can make changes to your stitch such
as thread tension, set your machine to free motion sewing,
adjust stitch width, stitch position (straight stitch only), length,
density, button sew-on and buttonhole length. Read more
about stitch altering on next page.
Free Motion Technique
When touching the Free Motion Technique icon a pop-up
will appear allowing you to choose between two options: Free
Motion Floating and Free Motion Spring Action.
Free Motion Floating
Activate to set the machine in Free Motion Floating mode.
You can use presser foot R or an optional foot. Lower the
feed teeth when using this function.
When sewing free motion at low speed the presser foot will
raise and lower with each stitch to hold the fabric on the
needle plate while the stitch is being formed. At higher speed,
the presser foot oats over the fabric while sewing. The fabric
must be moved manually.
To adjust the presser foot height in Free Motion Floating
mode, touch the + and - icon to make adjustments.
Skipped stitches can occur if your fabric moves up and down
with the needle as you are stitching. Lowering the presser foot
height will reduce the space between the presser foot and the
fabric and eliminate the skipped stitches.
Note: Be careful not to reduce the presser foot height too much. The fabric must still move freely under the presser foot.
Note: If Free Motion Floating is activated, do not use any Spring action feet, as this might damage the presser foot. Activate Stitch Width Safety if
the presser foot requires that.
Free Motion Spring Action
Select Free Motion Spring Action to activate the Free motion spring action mode. Lower the feed teeth. A spring action foot will
raise and lower with each stitch to hold the fabric on the needle plate while the stitch is being formed. The fabric must be moved
manually.
If you are using the optional Sensor Q-foot activate Free Motion Spring Action and Stitch Width Safety.
Stitch Selection
Area
Stitch
adjustment
Sewing
recommendations
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info