609685
41
Zoom out
Zoom in
Previous page
1/104
Next page
3:11SettingS & Function buttonS
EMBROIDERY SETTINGS
Selective Thread Cutter Auto for embroidery
The Selective Thread Cutter Auto in the Embroidery Settings
is activated by default. The threads are cut automatically and
the presser foot raises at color changes or when an embroidery
is nished. When deselected, no Selective Thread Cutter Auto
will be performed.
Automatic Jump Stitch Trim
This machine features Automatic Jump Stitch Trim. This
function saves you time trimming after the embroidery is
completed. As you embroider, the machine will trim the top
jump stitch thread and pull the thread end to the underside of
the fabric.
Note: The machine will also cut the thread after you have changed to a
new color. Hold the thread end when you start embroidering again, so
that you can easily remove the thread end when cut.
Designs marked with this symbol are programmed for Automatic Jump
Stitch Trim. Jump stitch trim commands can be added to any
design using the downloadable software.
See chapter 2.
Note: If the back of your embroidery will be visible, turn off the
Automatic Jump Stitch Trim and cut the threads manually.
Hoop Selection
Touch the Hoop Selection icon and select the hoops you own.
When you rst load a design, the machine will select the most
suitable hoop among the ones you have entered in the Hoop
Selection.
Presser Foot Height embroidery
Adjust the height of the presser foot in Embroidery Stitch-
Out mode when using your presser foot R.
Some embroideries may build up under the presser foot. If
there is not enough space between the presser foot and the
embroidery, the top thread will form loops on the underside
of the embroidery. Increase the presser foot height in small
steps until the embroidery moves freely under the presser
foot.
Sensor Q-foot for embroidery
When embroidering, activate the ”Sensor Q foot” function
when using the optional Sensor Q foot (part number 4131920-
45, available at your authorized HUSQVARNA VIKING
®
retailer). The Sensor Q-foot continously measures the fabric
thickness and adjusts the presser foot height.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info