609685
10
Zoom out
Zoom in
Previous page
1/104
Next page
1:10
PRESSER FEET
7
Utility Foot A
Snapped onto the machine upon delivery. This foot is used mainly for straight stitching and zigzag
stitching with a stitch length longer than 1.0.
7
Decorative Stitch Foot B
Use this foot for sewing close zigzag stitches (satin stitches) with less then 1.0 mm stitch length
and decorative stitches. The tunnel on the underside of the foot is designed to feed smoothly over
the stitches.
7
Buttonhole Foot C
For manual buttonholes. This foot has guide lines to determine buttonhole length. The middle
measures a
5
/
8
'' (15 mm) from the fabric edge. The two tunnels on the underside of the foot
ensure a smooth feed over the buttonhole columns. The nger on the back of the foot holds
cording for corded buttonholes.
Blindhem Foot D
This foot is used for blindhem stitches. The inner edge of this foot guides the fabric. The right
toe of the foot is designed to ride along the hem edge.
7
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle. This makes it easy to
sew both sides of the zipper. Move needle position to right or left to sew closer to zipper teeth or
for covering large cording.
Edging Foot J
This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width of
5.0 and 5.5 mm. Stitches form over the pin which prevents puckering at the edge of the fabric.
Embroidery/Darning Foot R
This foot is used for free motion embroidery/quilting/stitching and hoop embroidery.
7
Sensor One-Step Buttonhole Foot
Plug into the machine then enter the desired buttonhole length to sew Sensor One-Step
Buttonholes. The middle mark measures a
5
/
8
" (15 mm) from fabric edge.
Glide Sole
If sewing on foam, vinyl, plastic, or leather, the material might stick to the foot and prevent the
sewing machine from feeding properly. When using any of the above materials, sew on a piece of
scrap fabric, to make sure the machine feeds smoothly. If not, fasten the self-adhesive glide soles
to the underside of the presser foot.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Topaz 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Topaz 40 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Topaz 40

Husqvarna Designer Topaz 40 User Manual - German - 104 pages

Husqvarna Designer Topaz 40 User Manual - Dutch - 104 pages

Husqvarna Designer Topaz 40 User Manual - French - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info