609909
90
Zoom out
Zoom in
Previous page
1/100
Next page
6-4
Care of your Designer SE
Wrong stitch, irregular or narrow stitches?
Cancel twin needle safety and/or straight stitch
safety.
Turn machine off and on to reset.
Change needle; re-thread top and bobbin.
• Use stabilizer.
Presser foot will not go down?
Turn the machine off and on.
Set Sensor Foot lift on auto in Set Menu.
Interactive Designer Screen contrast is dark
(or light?)
Change screen contrast in Set Menu.
Interactive Designer Screen is off?
• Touch screen.
Cancel screen saver in Set Menu.
Turn machine off and on to reset.
Buttons on Interactive Designer Screen are
not activated when touched?
Calibrate the Interactive Designer Screen. See
instructions on page 1-27.
Machine sews slowly?
• Check speed.
Remove stitch plate and brush lint from
bob bin and teeth area.
Have machine serviced at your retailer.
Machine will not sew?
Check power and foot control plugs are
properly plugged into machine.
Check wall plug and power to wall plug.
Embroidery puckers?
Use correct stabilizer – see Accessory User’s
Gui de.
Hoop fabric tightly – see page 3-4.
Machine will not embroider?
Push embroidery unit fi rmly into machine socket.
Slide on hoop.
SE! Light
The long lasting diodes of the SE! Light do not
need to be replaced. If you experience problems
with your SE! Light, take your Designer SE to
your retailer.
Have your Designer SE serviced regularly by
your Husqvarna Viking retailer.
If you have followed this trouble shooting
in for ma tion and still are having sewing or
embroidery problems, take it to your retailer. If
there is a specifi c problem, it is a gre at help to test
sew with your thread on a scrap of your sewing
fabric. A sewing sample will often give much
better information than words to the technician.
Non-original Parts and Accessories
The Designer SE warranty does not cover any
defect or dam age caused by use of non-ori gi nal
ac ces so ries or parts.
How to update Designer SE
All information in this Husqvarna Viking
Designer SE User’s Guide is current at the time
of printing.
We constantly receive feedback from Designer SE
owners and retailers and use this in for ma tion to
produce updates and upgrades.
Updating instructions
Install the CD Designer SE 3D Embroidery
Software – 3D QuickFont, 3D Organizer and
Computer Connection – which is delivered
with your Designer SE.
Open the program 3D Confi gure and touch
the button Smart Update.
Follow the instructions.
NOTE: When installing the CD Designer SE 3D
Embroidery Software you will be asked to register
your Designer SE. To be able to update, your
Designer SE must be registered. You can register
online or by printing out the registration form and
mailing it in.
Be sure to consult the web site at
www.husqvarnaviking.com and/or your local
Husqvarna Viking retailer often for updates and
upgrades to your Designer SE and User’s Guide.
DSE 06 Kap 6ENG.indd 6-4 06-11-06 14.14.59
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE

Husqvarna Designer SE User Manual - German - 100 pages

Husqvarna Designer SE User Manual - Dutch - 100 pages

Husqvarna Designer SE User Manual - French - 100 pages

Husqvarna Designer SE User Manual - Spanish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info