609909
65
Zoom out
Zoom in
Previous page
1/100
Next page
4-11
Embroidery Mode
Important Resize Information
Because embroidery designs are digitized for a
specifi c design size, it is important to consider
some of the following information for resizing
designs in Designer SE.
Your resizing is always proportional. For
example a design reduced 50% will be 50%
smaller in both length and width. When
reducing a detailed design, it is possible that
some details may be lost or distorted and/or
heavy stitch build up may be created in the
detailed area of the design because more
stitches may be retained in that area. In some
cases it is recommended to reduce detailed
designs only to 75%.
Always embroider a test sample of your resized
design before sewing on a garment or project.
View your resized design in 3D on the
Interactive Designer Screen and be sure it fi ts
in the hoop as the Resize function will allow
you to resize larger than the hoop size. In
this case when you try to toggle to Interactive
Designer Embroidery, there will be a pop up
message “Design outside hoop area”.
When enlarging a design a great deal you may
see stitch irregularities within the design. Resize
to a smaller percentage for a better result. Due
to the memory in your Designer SE, you may
nd a design that is too complex to resize in
the machine. We recommend you resize very
large and/or complex designs on your PC
computer in the 3D Embroidery Studio or 3D
Stitch Editor Embroidery Software Program
which are available from your Husqvarna
Viking Dealer as an accessory.
When repeating the resize function on a design
that is on the Interactive Designer Screen
but has not yet been saved, it will always go
back to the original design for a new resizing,
which ensures the best stitch quality possible.
When a design has been saved at a resized
size and is brought to the Interactive Designer
Screen again for resizing, the new resizing will
be made on a design that has already been
resized and this can cause stitch irregularities.
For best result always begin the Resize
function with a design of original size.
Depending on how much you resize a design,
and on how many stitches it contains, the
resize process will take longer or shorter
time. Resizing a very large or complex design
can take up to a couple of minutes. Once
you touch
you cannot cancel the resize
process but need to wait for it to fi nish.
Touching
in the customizing screen will
restore the design to its original appearance.
We recommend using scaling instead of resize
for changing the design size less than 20% and
for embroideries digitized with single or triple
stitches such as cross stitch embroideries. In
this case you do not want to add stitches to
the design, only to make the design larger or
smaller by making each original stitch larger or
smaller.
It does not matter in what order you adjust the
size, rotate, mirror etc. When you touch
Designer SE always resizes fi rst, and then adds
the rotation, mirroring etc.
DSE 05 Kap 4.indd 4-11 05-03-18 16.32.53
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE

Husqvarna Designer SE User Manual - German - 100 pages

Husqvarna Designer SE User Manual - Dutch - 100 pages

Husqvarna Designer SE User Manual - French - 100 pages

Husqvarna Designer SE User Manual - Spanish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info