609909
11
Zoom out
Zoom in
Previous page
1/100
Next page
1-11
Set it Up
1.
Threading the Upper Thread
When threading the upper thread, make sure
that the presser foot is raised and the needle is
in the up position.
Horizontal Spool Pin
1. Pull the spool pin out. Place the spool on
the spool pin with thread reeling off over the
top. Push the spool pin back in. Place spool
holder in front of the spool with fl at side
against spool. Hold the thread near the spool
using your right hand.
2. Use your left hand to bring the end of the
thread over and behind the pre-tension
thread guide (a) and under the thread guide
(b). Bring the thread over the thread tension
discs (c).
3. Continue threading in the direction indicated
by the arrows. Bring the thread from the
right when threading into the slot on the
take-up lever.
4. Take the thread down to the last guide just
above the needle.
Vertical Spool Pin
1. Pull the spool pin out. Place the thread spool
on the spool pin (follow the instructions on
previous page).
2. Thread the machine according to the
instructions above with one exception.
Instead of bringing the thread into the pre-
tension guide, bring it directly under the
thread guide (b).
Auxiliary Spool Pin
The auxiliary spool pin is used when winding a
bobbin from a second spool of thread or for a
second spool when sewing with a twin needle.
Pull the auxiliary spool pin towards you and
down. The slight downward angle is to allow
the thread to reel off evenly in a straight
direction to the thread guide.
For large thread spools, place a large spool
holder in front of the spool. For narrow thread
spools, place a small holder in front of the
spool. Extra spool holders are provided with the
accessories.
b
2.
3.
4.
a
b
c
DSE 05 Kap 1.indd 1-11 05-03-14 10.56.47
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE in the language / languages: English as an attachment in your email.

The manual is 6,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE

Husqvarna Designer SE User Manual - German - 100 pages

Husqvarna Designer SE User Manual - Dutch - 100 pages

Husqvarna Designer SE User Manual - French - 100 pages

Husqvarna Designer SE User Manual - Spanish - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info