609910
89
Zoom out
Zoom in
Previous page
1/100
Next page
6-3
Care of your Designer SE
Turn machine off and on again to recalibrate
tension.
Follow recommendations for stabilizer.
Fabric does not move?
Make sure machine is not set to Free Motion Mode
in Set Menu.
Increase stitch length.
Upper thread breaks?
Does thread pull smoothly/not catching?
Use thread nets and quality thread.
New needle-size and type as recommended on
screen.
Re-thread top and bobbin – check for correct
threading.
Try different thread spool pin position on top
(hori zon tal or vertical).
Turn the machine off and on to reset automatic
ten sion.
If stitch plate hole is damaged, replace stitch plate.
Is the correct spool holder used in front of the
thread?
If spool is on vertical spool pin, no spool holder
should be on top.
Bobbin thread breaks?
Wind a new bobbin.
Replace bobbin in machine; check correct threading,
page 1-15.
If stitch plate hole is damaged – replace stitch plate.
Bobbin alarm does not work?
Clean lint from bobbin area.
Use only authentic Husqvarna Viking green style
bobbins.
Bobbin winds irregularly?
Check threading for bobbin winding.
Thread cutter does not cut?
Remove stitch plate and clean lint from bob bin area.
In embroidery – go to Set Menu; set thread cutter
on auto.
Wrong stitch, irregular or narrow stitches?
Cancel twin needle safety and/or straight stitch
safety.
Turn machine off and on to reset.
Change needle; re-thread top and bobbin.
• Use stabilizer.
Trouble Shooting:
Any time you experience a problem when
sewing:
Enter correct type and weight of fabric into Sewing
Advisor™.
Insert new needle size and type as recommended on
screen.
Re-thread top and bobbin thread.
Use a different thread spool on top (vertical or
horizontal).
Use thread nets and quality thread. We recommend
the same sewing thread on top and bobbin for
general sewing and embroidery thread on top and
embroidery bobbin thread for embroidery.
Fabric puckers?
Enter correct type and weight of fabric into Sewing
Advisor™.
Check needle; it could be damaged.
Insert new needle size and type as recommended on
screen.
Re-thread top and bobbin thread.
Change thread type to match fabric and sewing
technique.
Use quality thread.
Shorten stitch length.
• Use stabilizer.
Skipped stitches?
Check needle, it could be damaged.
Change needle to recommended size and type.
Be sure needle is inserted correctly and all the way
into the clamp.
Re-thread top and bobbin.
Use recommended presser foot.
Turn machine off and on to reset automatic tension.
Consult your dealer for service.
Needle breaks?
Use care not to pull fabric when sewing.
Insert new needle as recommended on screen.
Insert needle correctly as page 1-20 explains.
Poor tension?
• Enter fabric weight and type in Sewing Advisor™.
Re-thread top and bobbin – use quality thread.
New needle-size and type as recommended on
screen.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer SE - Limited Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer SE - Limited Edition in the language / languages: English as an attachment in your email.

The manual is 6,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer SE - Limited Edition

Husqvarna Designer SE - Limited Edition User Manual - German - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - Dutch - 100 pages

Husqvarna Designer SE - Limited Edition User Manual - French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info