609903
8
Zoom out
Zoom in
Previous page
1/116
Next page
1:8
PRESSER FEET
7
Utility Foot A
Snapped onto the machine upon delivery. This foot is used mainly for straight stitching and
zigzag stitching with a stitch length longer than 1.0.
7
Decorative Stitch Foot B
For sewing close zigzag stitches (satin stitches) with less than 1.0 mm stitch length, other utility
stitches or decorative stitches, use this foot. The tunnel on the underside of the foot is designed
to feed smoothly over the stitches.
7
Buttonhole Foot C
For manual buttonholes. This foot has guide lines to determine buttonhole length. The middle
measures a 5/8'' (15 mm) from the fabric edge. The two tunnels on the underside of the foot
ensure a smooth feed over the buttonhole columns. The À nger on the back of the foot holds
cording for corded buttonholes.
Blindhem Foot D
This foot is used for blindhem stitches. The inner edge of this foot guides the fabric. The right
toe of the foot is designed to ride along the hem edge.
7
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle. This makes it easy to
sew both sides of the zipper. Move needle position to right or left to sew closer to zipper teeth
or for covering large cording.
7
Non-Stick Glide Foot H
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or
leather to keep these materials from sticking to the foot.
ACCESSORIES INCLUDED - Not in the Picture
5D™ Embroidery Machine Communication CD
Carrying Case (attached on the machine upon delivery)
Scissors
Foot control
Power cord
USB PC cable
Needles
Embroidery thread
Pieces of fabric and stabilizer
DESIGNER RUBY™ Sampler book
• User’s Guide
Warranty card
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Ruby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Ruby in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Ruby

Husqvarna Designer Ruby User Manual - German - 116 pages

Husqvarna Designer Ruby User Manual - Dutch - 116 pages

Husqvarna Designer Ruby User Manual - French - 116 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info