609769
56
Zoom out
Zoom in
Previous page
1/84
Next page
Darning and Mending
Select fabric type and stitch 1:21
Darning a small hole or a tear before it becomes larger can
save a garment. Choose a fine thread in a color as close to
your garment as possible.
1. Place the fabric in position under the presser foot.
2. Start sewing above the hole and over it.
3. Once over the hole, press the reverse button. Continue
sewing. The machine sews back and forth across the hole
16 times and then stops.
4. The LED next to the STOP button is lit automatically,
indicating that the darning stitch can be repeated with the
same size. Reposition your fabric, then step on the foot
control to sew again. The stitch will now repeat the same
size darning square. The machine will stop automatically
when the stitch is completed. To cancel the repeat
function, press the STOP button.
Bartack (Manual)
Woven heavy and stitch 1:22.
Secure elastic ends, drapery pleats, belt loops, and pocket
corners with the same look as ready-to-wear.
Place fabric under the presser foot.
Lower the presser foot.
Step on the foot control.
1. Your machine will sew a straight stitch until you press
reverse.
2. Your machine will then sew in reverse until you press
reverse again.
3. Your machine will then sew a zigzag, covering the
straight stitches.
4. Press reverse to automatically tie off.
56 5 Sewing Techniques
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER JADE 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER JADE 35 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER JADE 35

Husqvarna DESIGNER JADE 35 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info