517460
112
Zoom out
Zoom in
Previous page
1/117
Next page
112
Care of your Designer I
Poor tension?
• Enter fabric weight and type in Sewing Advi-
sor.
• Re-thread top and bobbin – use quality thread.
• New needle-size and type as HELP recommen-
ded.
• Turn machine off and on again to recalibrate
tension.
• Follow HELP recommendations for stabilizer.
Fabric does not move?
• Feed teeth up.
• Increase stitch length.
Upper thread breaks?
• Does thread feed smoothly/not catching?
• Use thread nets and quality thread.
• New needle-size and type as HELP recommen-
ds.
• Re-thread top and bobbin – check for correct
threading.
• Try different thread spool pin on top (hori zo-
n tal or vertical).
• Turn the machine off and on to reset automa-
tic ten sion.
• If stitch plate hole is damaged, replace stitch
plate.
• Are the correct thread holder used in front of
the thread?
Bobbin thread breaks?
• Wind a new bobbin.
• Replace bobbin in machine, check correct th-
reading, page 11.
• If stitch plate hole is damaged – replace stitch
plate.
Bobbin alarm does not work?
• Clean lint from bobbin area.
• Use only authentic Husqvarna green style
bobbins.
Bobbin winds irregularly?
• Check threading for bobbin winding.
Any time you experience a problem when
sewing:
• Enter correct type and weight of fabric into
Sewing Advisor.
• Insert new needle-size and type as HELP re-
commends.
• Re-thread the top and bobbin.
• Use different thread spool on top (vertical or
horizontal).
• Use thread nets and quality thread. We recom-
mend the same sewing thread on top and
bobbin for general sewing and 40 weight em-
broidery thread on top and bobbin thread for
embroidery.
Fabric puckers?
• Enter correct type and weight of fabric into
Sewing Advisor.
• Check needle, it could be damaged.
• Insert new needle size and type as HELP re-
commends.
• Re-thread top and bobbin.
• Change thread type to match fi bre and sewing
technique.
• Use quality thread.
• Shorten stitch length.
• Use stabilizer.
Skipped stitches?
• Check needle, it could be damaged.
• Change needle to recommended size and
type.
• Be sure needle is inserted correctly and all the
way into clamp.
• Rethread top and bobbin.
• Use recommended presser foot.
• Turn machine off and on to reset.
• Consult your dealer for service.
Needle breaks?
• Use care not to pull fabric when sewing.
• Insert new needle as HELP recommends.
• Insert needle correctly as page 16 explains.
Trouble Shooting (fault-fi nding):
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer I in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer I

Husqvarna Designer I User Manual - German - 117 pages

Husqvarna Designer I User Manual - Dutch - 117 pages

Husqvarna Designer I User Manual - French - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info