517460
9
Zoom out
Zoom in
Previous page
1/117
Next page
9
Learn your Designer I
3. Continue threading in the direction indicated
by the arrows. Bring the thread from the right
when threading into the slot on the take-up
lever.
4. Take the thread down to the last guide just
above the needle.
Vertical spool pin
1. Pull the spool pin out. Place the spool on the
spool pin (follow the instructions on previous
page).
2. Thread the machine according to the instruc-
tions with one exception. Instead of bringing
the thread into the pre-tension guide, bring it
directly under the thread guide (b).
Needle threader
The needle must be in the up position to use
the needle threader. We also recommend that
you lower the presser foot.
1. Pull the needle threader all the way down,
behind the needle.
2. Bring it forward until the metal fl anges cover
the needle. A small hook will pass through
the eye.
3. Place the thread around guide (a) and under
the fl anges in front of the needle, so it catch-
es into the small hook.
4. Let the needle threader gently swing back,
the hook pulls the thread through the needle
eye and forms a loop behind the needle. Pull
the thread loop out behind the needle.
5. Place thread under the presser foot and cut
the thread.
Note: You can not use the Needle threader for the
wing needle, twin needle, triple needle, a needle
smaller than size 70 or when the Buttonhole Sen-
sor Foot is on. The needle is threaded from front to
back. The white on the pres ser foot ankle makes it
easy to see the eye of the needle.
Thread warning
If the upper thread breaks or bobbin thread runs
out, the machine stops. Upper thread or bobbin
sym bol appears on a Pop-up Menu on the Color
Touch Screen. If upper thread breaks: Re-thread
the machine and touch OK on the Pop-Up Menu.
The Pop-up disappears. If bob bin thread runs
out: Rem ove your work and the bobbin. Fill the
bobbin. Replace the bob bin and sew.
1.
2.
3.
4.
5.
a
b
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer I at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer I in the language / languages: English as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer I

Husqvarna Designer I User Manual - German - 117 pages

Husqvarna Designer I User Manual - Dutch - 117 pages

Husqvarna Designer I User Manual - French - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info