609741
46
Zoom out
Zoom in
Previous page
1/198
Next page
How to Attach the Guide
The two edge/quilting guides included with your machine
will help you sew parallel rows of stitching side by side as in
channel quilting or tucking. There is one guide for the left
side, and one for the right.
6. Insert the guide into the hole in the back of the dual feed.
Adjust the space between the foot and the guide by
pulling it to the left or to the right.
Note: The edge guides can also be used without the dual feed. Insert one
into the hole at the back of the presser foot ankle and tighten the screw.
Changing to Straight Stitch Plate
The Straight Stitch Plate is recommended for embroidery. It
may also be used for certain techniques in sewing mode, such
as quilt piecing. The smaller hole in the Straight Stitch Plate
supports the fabric closer to the needle and helps prevent the
fabric from being pulled down into the bobbin area,
especially at the beginning and/or end of a seam.
1. Remove the presser foot. Open the bobbin cover by
pushing the release button (A) to the right. Remove the
cover.
2. Make sure that the feed teeth are lowered. Place the
universal tool under the needle plate as shown and gently
turn the universal tool to pop off the needle plate.
Note: Lower the feed teeth by touching the presser foot up and extra
lift button.
Note: When changing the needle plate, clean any lint and threads
from the bobbin area.
3. With feed teeth lowered, position the Straight Stitch Plate
so that it fits into the notches at the back (B). Press the
Straight Stitch Plate down until it clicks into place.
Replace the bobbin cover.
To prevent needle breakage or damage to the plate, remove
any accessory that is not compatible with the Straight Stitch
Plate, such as twin needle.
46 2 Preparations
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna DESIGNER EPIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna DESIGNER EPIC in the language / languages: English as an attachment in your email.

The manual is 9,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna DESIGNER EPIC

Husqvarna DESIGNER EPIC User Manual - French - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info