517458
125
Zoom out
Zoom in
Previous page
1/134
Next page
10:3
Maintenance
Problem/cause Remedy
General problems
Bobbin alarm does not work? Clean lint from bobbin area and use only the original
HUSQ
VARNA VIKING® bobbins approved for this
model.
Thread cutter does not cut the thread? Remove needle plate and clean lint from bobbin area.
Enable automatic thread cutter in the SET Menu.
Fabric does not feed? Make sure that machine is not set in free-motion mode in
the Sewing Settings menu in the SET menu.
Wrong stitch, irregular or narrow stitch? Deactivate Twin Needle or Stitch Width Safety Sewing
Settings in the SET
Menu.
T
he needle breaks? Insert needle correctly as described in chapter 2.
The machine will not sew? Check that all plugs are securely plugged into the machine
and into the wall socket.
The screen is turned off? Touch the screen to activate.
Turn off Screen Saver in the SET Menu.
Icons on the screen are not activated when touched? Calibrate the screen. Calibrate is found in the SET Menu.
The sewing and embroidery machine screen and/or
function buttons do not respond to touch?
The sockets and function buttons on the machine can be
sensitive to static electricity. If the screen does not respond
to touch, turn the machine OFF and then ON again. If the
problem persists, contact your authorized HUSQVARNA
VIKING® dealer.
The machine skips stitches
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Change the needle.
Needle thread breaks
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did y
ou insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Are you using poor thread with slubs or thread which has
become dry?
Change to a new high quality thread purchased from an
authorized HUSQVARNA VIKING® dealer.
Is a correct spool cap used? Attach a spool cap of the right size for the actual thread
spool (see chapter 2).
Is the best spool pin position used? Try a different spool pin position (vertical or horizontal).
Is the needle plate hole damaged? Change the needle plate.
Troubleshooting
In this troubleshooting guide you will À nd solutions to the problems you may have with your machine. For further
information please contact your local authorized HUSQVARNA VIKING® dealer who will be happy to help you.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info