517458
108
Zoom out
Zoom in
Previous page
1/134
Next page
8:6
Embroidery Stitch-Out
Baste in Hoop
Basting enables you to secure your fabric to a hooped
stabilizer. It is especially useful when the fabric to be
embroidered cannot be hooped. Basting provides support
for stretchy fabrics.
Touch the Baste in hoop icon to add a basting stitch
around the design. Touch and hold to open the embroidery
basting window.
Baste around design
Select Baste around design to add a basting stitch around
the design, outlining the area where the design will be
placed on the fabric.
Baste around hoop area
Select Baste around hoop area to add a basting stitch
around the inside edge of the hoop.
You can select both basting options to add additional hold
for certain fabrics and techniques.
Note: The baste stitches will be added in the color block list, with the
possibility to step stitch by stitch and step in and out of the baste color
block/s. The baste color block/s will disappear from the color block
list when stitched out.
Note: Basting can only be enabled when positioned at the À rst stitch in
the embroidery.
Note: Touch the FIX button on your machine to activate or deactivate
the selected basting techniques.
Move Hoop
Use the Move Hoop functions to move the embroidery
arm to different positions.
Current Stitch Position
When you want to return to the current stitch position
and continue embroidering where the embroidery was
interrupted, touch the Current Stitch Position icon. You
can also press the Start/Stop button once to return to the
current stitch position and start to embroider.
Park Position
When you have À nished your embroidery, remove the
hoop and select Park Position. The embroidery arm will be
placed in the correct position for storage.
Use the Park Position when you want to move the
embroidery arm out of the way for sewing.
Note: It is important that the hoop is removed before selecting Park
Position to prevent damage.
Bobbin Position
To make it easier to change the bobbin, touch Bobbin
Position. The hoop will move away from you, allowing you
to open the bobbin cover and replace the bobbin.
Note: You can also touch the Stitch-ReStart button on our machine to
move the hoop to bobbin access position.
Trim Position
Trim Position will move the hoop towards you making
it easier to trim your jump stitches and trim fabric for
specialty techniques.
Note: You can also use touch the Needle Up/Down button on your
machine to move the hoop to trim position.
Center Position
Use the Center Position if you want to check where the
center position of the design will be placed on the fabric.
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info