517458
94
Zoom out
Zoom in
Previous page
1/134
Next page
7:8
Embroidery Edit
Important Resize information
Since designs are digitized for a speciÀ c design size, it is important to
consider the following information about Resize. Always embroider a
test sample of your resized design before embroidering on a project.
Resize is always proportional. If you reduce a design
30%, it will be 30% smaller in both length and width.
If the design is very detailed, some of it may be lost or
distorted, and/or it can be very dense. Some designs
should not be reduced more than 25% if they have too
many details.
Designs can be increased larger than the hoop, so be
sure that the design À ts in the hoop. If the design is
larger than hoop size, the machine will not be able to
embroider it.
If you are enlarging a design too much, you may see
stitch irregularities. Press the Control Center to return
to 100% and resize to a smaller percentage for a better
result. Depending on the memory left in the machine,
you may À nd some designs too complex to resize in
the machine. Please use 4D™ Embroidery Software to
resize very large and complex designs. It is available to
purchase from your local authorized dealer.
Always start with the original design when resizing.
T
his is to ensure the best possible stitch quality. If a
resized design is saved, and then resized again, it can
cause stitch irregularities. For the best resize result,
always start with a design in original size.
Depending on how much you resize a design and
how many stitches it contains, the resize process time
will vary. Resizing a very large or complex design may
take a few minutes. Once you touch OK, you cannot
cancel. You will need to wait for the process to be
À nished.
It does not matter in which order you select functions
to adjust the size, rotation, mirroring etc. When you
touch OK, your machine always resizes À rst and then
adds the rotation, mirroring etc.
It is recommended that you scale instead of resize to
change a design less than 20% and also for designs
digitized with single or triple stitches, such as cross
stitch embroideries. In this case, you do not want to
add stitches to the design, you only want to make the
design larger or smaller by making each original stitch
larger or smaller.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Designer Diamond at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Designer Diamond in the language / languages: English as an attachment in your email.

The manual is 10,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Designer Diamond

Husqvarna Designer Diamond User Manual - German - 134 pages

Husqvarna Designer Diamond User Manual - Dutch - 134 pages

Husqvarna Designer Diamond User Manual - French - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info