517456
28
Zoom out
Zoom in
Previous page
1/40
Next page
28
Instruction book/Manual de instrucciones 315, 325, 335
Sewing terry cloth
Terry cloth is a rather loosely woven fabric in
which seams easily break.
Sew the garment together with straight stitch.
Trim the seams and press the seam allowance
at and sew the edges down against the
garment on the wrong side with three-step
zig-zag.
Even though the stitching goes right through
to the ”right” side of the garment, it is nearly
invisible and even the wrong side looks neat.
Use presser foot A if you have model 315.
El tejido esponjoso suele tener una textura
bastante fl oja, que ceda fácilmente en las
costuras. Cosa y una la prenda con costura
recta. Después, corte los aumentos limpia-
mente y planche ambos bordes de la costura.
Después, cosa al borde de los cantos, por
el revés, con el zig-zag de tres puntadas.
Aunque la costura traspase el tejido, es casi
invisible y el revés tiene buena presentación.
Utilizar el prensatelas A en modelo 315.
Tejidos esponjosos
Some stitches can be used for seaming and
over cas ting directly on the edge where a 5
mm (1/4") seam is allowed. Place the fabric
so that the inside right ”toe” of the
presser foot follows the edge of the
fabric.
Presser foot J is also used to over lock
and overcast many dif fe rent fabrics with
the exception of heavy, fi rm fabrics.
The pin on the presser foot should
follow the edge of the fabric and will
prevent the fabric from pucke ring.
Stitch width 5.5 mm. Follow the recom-
mended setting, given for stitch length.
Overcast stitch may be used to sew
light and medium non-stretch fabric
and light stretch fabric. Snap on presser
foot J. Use presser foot A if you have
model 315.
Overlock is chiefl y used for sewing
heavy stretch fabric. Snap on presser
foot B. Use presser foot A if you have
model 315.
Seam and overcast Unión y sobrehilado
Ciertas costuras se utilizan para unir y sobre-
hilar directamente sobre el borde en una
ope-ración con 5 mm de costura. Ponga el
géne-ro de manera que el borde interior
del ”dedo” derecho del prensatelas guíe
el canto del tejido.
El prensatelas J se utiliza para el sobre-
hilado y para costuras al canto en todos
tipos de tela, con excepción de telas muy
gruesas y duras. La punta del pie debe
estar canto a canto con la tela e impedir
así que se contraiga el borde de la tela.
Ancho de puntada 5.5 mm. Por lo demás
siga las recomendaciones sobre la longi-
tud de puntada.
Puntada semi-overlock se emplea para
telas fi nas y corrientes, para géneros no
elásticos y para telas fi nas elásticas. Utili-
zar el prensatelas J. Utilizar el prensatelas
A en modelo 315.
Puntada de overlock se emplea para telas
gruesas y elásticas. Utilizar el prensatelas
B. Utilizar el prensatelas A en modelo
315.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Daisy 325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Daisy 325 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info