517455
26
Zoom out
Zoom in
Previous page
1/40
Next page
26
Instruction book/Manual de instrucciones 315, 325, 335
Zigzag
The zigzag is utilized for sewing
on lace, bound edging and appliqués.
The zigzag width will be decreased
from the left 5.5 mm width, steplessly
to the right to 0 mm. In this position
the machine sews straight stitch in
the right needle position. Experiment
until you reach the best setting for your
actual work.
Zig-zag
La costura zig-zag se usa, p.ej.
para aplicar encajes, ribetear con cintas
y también para hacer aplicaciones. La
amplitud de zig-zag es progresivamente
regulable hacia la izquierda 5.5 mm
amplitud a la derecha a 0 mm. Ahora la
máquina cose una costura recta con la
aguja en posición derecha.
Desde allí puede modifi car hasta en
contrar las regulaciones más apropiadas
a su labor.
Needle
Positions
You can select straight stitch and reinforced
straight stitch, with the needle in left position.
The needle position can be adjusted in steps.
Use the stitch width dial, turn to the right to
reach the right position.
To edge stitch, you should take advantage of
the possibility to set the needle to the left or
the right position.
Fit presser foot A when sewing light fabrics
and presser foot D for
other fabrics.
Place the fabric and
sew so that the edge
follows the inside right
edge of the presser
foot D or the fi rst mark
of the left edge of the
presser foot A.
If you wish to sew
about 5 mm from the
edge or sew a narrow
hem, use pres ser foot
A and set the needle to the right
position.
Place the edge of the fabric so that
it follows the outside right edge of
the pres ser foot and sew the hem.
Posición
de la aguja
En costura recta y en costura recta resforzada se
puede cambiar la posición izquierda de la aguja.
Esto se efectúa con el regulador del ancho de
puntada, girar al la derecha para llegar la posi-
ción derecha.
Cuando quiera coser un pespunte cerca de un
borde exterior, es más fácil coser con la aguja
en posición de izquierda o derecha.
Para géneros muy ligeros se emplea el prensate-
las A y para los demás el
prensatelas D.
Ponga el género con su
borde exterior contra el
lado interior del ”dedo”
derecho del prensatelas
D o contra la primera
entalladura del ”dedo”
izquierdo del prensatelas
A y coser el pespunte.
Cuando quiera pespun-
tear ca. 5mm del borde
o hacer un dobladillo
estrecho, se hace con la aguja en posi-
ción derecha. Utilizar el prensatelas A.
Poner el borde del tejido debajo del
borde exterior derecho del prensatelas
y coser un pespunte o un dobladillo.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Daisy 315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Daisy 315 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info