517455
18
Zoom out
Zoom in
Previous page
1/40
Next page
18
Instruction book/Manual de instrucciones 315, 325, 335
Stitch selection Selección de puntada
Your machine will sew all the stitches pictu-
red on the front. The stitch is set by turning
the stitch selector – the upper dial. A colored
marker lines up while turning the stitch selec-
tor, showing which stitch is set.
Check that the needle is in its highest position
before you turn the stitch selector.
The lower dial is to ajdust the stitch length.
The stitches are divided into two groups. For-
ward motion and trimotion stitches. The stitch
length for the left group, forward motion
stitches, can be varied between 0 and 6 and
the width between 0-5.5.
Recommendations for the suggested stitch
length are given next to the stitches.
When you wish to use one of the stitches in
the right group, the trimotion stitches, you
turn the stitch length dial to the left until it
reaches the area . The stitch length
is set for these stitches. The stitch width can
be set between 0-5.5.
There are letters between the stitch pictures
which indicate the most suitable presser foot
for each stitch. The letter is also marked on
the presser foot.
En la parte frontal de la máquina se encuen-
tra el selector de las costuras que Ud. puede
realizar con ella. La costura deseada se obtiene
girando el selector de puntada. Un cursor de
color se mueve simultáneamente al girar el
selector de puntada y muestra la que ha sido
seleccionada. Controlar que la aguja esté en
su posición más alta al girar el selector de
puntada. Con el volante inferior se cambia
la longitud de puntadas. Las costuras están
divididas en dos grupos. Para las de grupo a la
izquierda, la longitud de puntada puede variar
entre 0 y 6 mm y la amplitud entre 0-5.5 mm.
Delante de respective puntada se presenta in-
formación sobre la regulación más conveniente
al tipo de costura seleccionada.
Cuando quira realizar alguna de las costuras
del grupo a la derecha debe girar el regulador
de longitud de puntada a la izquierda, hasta
la zona . Esto signifi ca que esas
costuras tendrán ahora una longitud incor-
porada fi ja. La amplitud de puntada puede
regular entre 0-5.5 mm. Entre los sìmbolos de
costuras hay letras que indican el prensatelas
más apropiado para cada costura. La misma
letra se encuentra en el prensatelas.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Daisy 315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Daisy 315 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info