579228

Husqvarna CTH141 Manual

65
Zoom out
Zoom in
Previous page
1/92
Next page
65
TO CHANGE OIL
CAUTION: If engine has been operated for an extended
period of time immediately prior to draining oil, oil will be hot.
• Slide oil drain extension onto chassis under oil drain hole.
• Position a container under oil drain extension to catch oil.
• Loosen and remove oil drain plug with 1/2" (12 Point)socket
wrench (extension recommended).
• Drain oil through oil drain extension.
• Reinstall oil drain plug.
WARNING: Do not overtighten (13 Ft. Lbs./17 Nm).
1. Oil drain hole
2. Oil drain extension
3. Oil drain plug
ÖLWECHSEL DURCHFÜHREN
VORSICHT: Falls der Motor unmittelbar vor dem Ölwechsel
noch lief, wird das Öl noch heiß sein. Vorsicht!
• Ölablaufverlängerung unter die Ölablaufbohrung am Fah-
rgestellt schieben.
• Einen Behälter unter die Ölablaufverlängerung zum Auf-
fangen des Öls stellen.
• Die Ölablauf-Verschlussschraube mit einem 1/2” (12 Punkt)
Schlüssel (Verlängerung empfohlen) lösen und entfernen.
• Öl durch die Ölablaufverlängerung ablassen.
• Ölablauf-Verschlussschraube wieder eindrehen und an-
ziehen.
WARNUNG: Nichtzu fest anziehen (13 Ft. Lbs./17 Nm).
1. Ölablaufbohrung
2. Ölablaufverlängerung
3. Ölablauf-Verschlussschraube
POUR CHANGER L’HUILE
PRUDENCE: Si le moteur a tourné pendant une période pro-
longée juste avant la vidange de l’huile, l’huile sera chaude.
• Glissez le bec de vidange sur le châssis, sous l’orifice de
vidange.
• Placez un récipient sous le bec pour récupérer l’huile.
• Dévissez et enlevez le bouchon de vidange à l’aide d’une clé
à douille de 1/2 pouce (12 points) (rallonge recommandée).
• Vidangez l’huile à travers le bec de vidange.
• Refermez le bouchon de vidange d’huile
ATTENTION: Ne serrez pas excessivement(13 Ft. Lbs. /17 Nm).
1. Orifice de vidange d’huile
2. Bec de vidange d’huile
3. Bouchon de vidange d’huile
PARA CAMBIAR EL ACEITE
ATENCIÓN: El aceite estará caliente si el motor ha estado
funcionando durante un tiempo prolongado inmediatamente
antes de drenarlo.
• Deslice el extensor de drenaje del aceite sobre el chasis
situado por debajo del orificio de drenaje.
• Coloque un recipiente debajo del extensor de drenaje para
recoger el aceite.
• Afloje y retire el tapón de drenaje del aceite con una llave
de vaso de 1/2 pulgadas (12 puntos) (recomendada para
el extensor).
• Deje correr el aceite por el extensor de drenaje.
• Vuelva a colocar el tapón en su lugar.
ADVERTENCIA: No lo apriete en exceso(13 Ft. Lbs./17 Nm).
1. Orificio de drenaje del aceite
2. Extensor de drenaje del aceite
3. Tapón de drenaje
PER CAMBIARE L’OLIO
ATTENZIONE: Se il motore è stato in funzione per un lungo
periodo di tempo subito prima dello scolo dell’olio, prestare
attenzione perché l’olio è caldo.
• Fare scorrere la prolunga di scolo sul telaio sotto al foro
di scarico dell’olio.
• Posizionare un contenitore sotto alla prolunga per rac-
cogliere l’olio.
• Allentare e togliere il tappo dell’olio con una chiave a bus-
sola 1/2” (12 punti) (prolunga consigliata).
• Fare scolare l’olio attraverso la prolunga.
• Rimettere il tappo dell’olio.
PERICOLO: Non serrare eccessivamente (13 Ft. Lbs./17 Nm)
1. Foro di scolo dell’olio
2. Prolunga di scolo dell’olio
3. Tappo del foro di scolo dell’olio
OLIE VERVANGEN
VOORZICHTIG: Als de motor lange tijd gedraaid heeft vlak
voor het aftappen van de olie, is de olie heet.
• Schuif het verlengstuk van de olieaftapkraan op het chassis
onder de olieaftapopening.
• Plaats een opvangbak onder het verlengstuk van de
olieaftapkraan om de olie op te vangen.
• Draai de olieaftapplug los met een 1/2” (12 punts) dopsleutel
(verlengstuk aanbevolen).
• Tap de olie af door het verlengstuk van de olieaftapkraan.
• Plaats de olieaftapplug terug.
WAARSCHUWING: Niet te vast aandraaien (13 Ft. Lbs. /17 Nm).
1. Olieaftapopening
2. Verlengstuk olieaftapkraan
3. Olieaftapplug
1
2
3
6
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH141 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH141 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info