477560
19
Zoom out
Zoom in
Previous page
1/96
Next page
19
INSTALL SEAT
Remove the hardware securing seat to the cardboard pack ing
and set the hardware aside for assembly of seat to tractor.
Remove the cardboard packing and discard.
NOTE: Check that the flex connector is correctly con nect ed
to the safe ty switch (1) on the seat hold er.
Place seat on seat pan so pads are positioned over large
slotted hole in pan (2).
Push down on seat to engage pads in slots and pull seat
towards rear of tractor.
Tighten the bolt securely (3).
ADJUST SEAT
Lift up adjustment lever (4) and slide seat until a comfort-
able position is reached which allows you to press clutch/
brake pedal all the way down. Release lever to lock seat in
position.
SITZ MONTIEREN
Entnehmen Sie die Teile, mit denen der Sitz an der Karton-
age befestigt ist. Bewahren Sie diese Teile auf, da sie für die
Montage des Sitzes am Traktor noch benötigt werden.
Entfernen Sie die restlichen Verpackungsteile und entsorgen
Sie diese.
HINWEIS: Prüfen, daß das Kabel richtig an dem Sicherheitss-
chalter (1) auf dem Halter des Sitzes angeschlossen ist.
Der Sitz wird so auf die Sitzplatte plaziert, dass sich der
Hauptbolzen über dem Schlitz in der Platte befindet (2).
Sitz herunterdrücken, so dass der Bolzen in den Schlitz
einrastet und dann den Sitz nach hinten ziehen.
Die Einstellschraube anziehen (3).
EINSTELLEN DES SITZES
Heben Sie den Stellhebel (4) an und verschieben Sie den
Sitz, bis eine bequeme Position erreicht ist, in der Sie Kup-
plungs- und Bremspedal ganz niederdrücken können. Las-
sen Sie den Hebel wieder in die Position zum Verriegeln des
Sitzes einrasten.
MISE EN PLACE DU SIEGE
Retirer le bouton de réglage et la rondelle plate qui fixent le
siège à l'emballage de carton, le conserver pour le montage
du siège sur le tracteur.
Se débarrasser ensuite de l'emballage.
REMARQUE: Vérifier que le câble électrique est bien con-
necté sur le contacteur de sécurité (1) placé sous l'embase
du siège.
Placer le siège sur son embase de façon que la tête de la vis
à épaulement se place dans le trou à l'extrémité de la large
fente de l'embase (2).
Pousser le siège vers le bas pour engager la vis à épaule-
ment dans la fente puis repousser le siège vers l'arrière du
tracteur.
Serrer ensuite à fond la vis (3).
RÉGLAGE DU SIÈGE
Tirez vers le haut le levier de réglage (4) et faites glisser
le siège jusqu’à ce que vous soyez confortablement assis
et que vous puissiez enfoncer complètement la pédale de
frein/d’embrayage. Libérez le levier pour verrouiller la posi-
tion du siège.
1
43
2
2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CT154 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CT154 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 10,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info